Payment & Shipping Terms:
|Features:||Four-way DVR, Video Can Be Played In System Or Computer||Angle:||180° Wide Angle For Each Camera|
|Model:||Univeral Model For Every Car||Waterproof:||IP67|
|Resolution:||720P||Working Temperature:||-20~70 Degree|
*360˚ around view, seamless splicing, getting rid of blind spots.
*Easy to calibrate
*Four ways DVR for recording on real-time.
*High definition signal input, high resolution on the images
|Camera||1.IC Sensor||Aptina AR0130|
|2.Sensor Size||1/3” Color Sensor|
|4. The Lowest Illuminance||0.1 LUX|
|5. Dynamic Range||82dB|
|6. Signal Output||AHD 720P|
|8. Angle||Horizontal View Angle>175˚|
|9. Working Voltage||3.3V|
|10. Working Current||<250 mA|
|Host||1. Working Voltage Range||9-16V|
|2. Working Current||<500 mA|
|3. Standby Current||<10 mA|
|4. Working Temperature Range||-20˚C~80˚C|
|5. Working Humidity Range||40%~80%|
Introduction of Parts in Host
Ports for host and wire harness
* power connector : connect to the power and control line( power and control line is connected to the B+, ACC, GND, reversing and turn signal)
* Black connector : connect to the front camera
* Yellow connector: connect to the rear camera
* Red connector: connect to the left camera
* Blue connector: connect to the right camera
* Yellow AV connector: it is the port for video output from host, an it can be connected to the monitor by the video extension cable.
* Black 3.5 mm connector: connect to the IR receiver.
* USB port: connect to U disk. It is used for driving recording, system upgrade and saving parameter.
* Indicated light: Indicating the status of host power. If the light is on, it indicates the host work normally; if the light is off, it indicates the power supply in the host is abnormal.
1. Yellow cable: connect to the vehicle voltage 12V
2. Four pieces of chessboard mats whose size is 1.6m*1.2m. Matt surface of mats is preferable, because the reflective surface is not good for the picture recognition.
3. Electric drill, multimeter and screwdriver are needed.
4. Installation of 360 host
(1) 360 host can be installed at any place of the driver’s cab. In order to make convenience for inserting or taking out of the SD card, locations that near the monitor are recommended.
(2) 360 host has to be fixed firmly to avoid shaking and making damage on the storage of the file.