Payment & Shipping Terms:
|Horizontal Resolution:||1000TVL||Image Sensor:||Sony225|
|Working Temperature:||-25~75degree||Specifications::||Four-way DVR In Real Time, Loop Recording|
* 360˚ panoramic view , eliminating blind spot
* Four-channel DVR in real time with loop recording
* High definition image (1080P)
* Advanced seamless splicing technology
* Make a clear vision around the vehicle
* Four 180°fish-eye cameras
* HD night vision
|Pixel Pitch||um||1280(H) x 960(V)|
|SNR||dB||24.0 dB (minimum)|
|The Lowest Illuminance||LUX||0.0001 LUX F1.2|
|Working Voltage||V||DC 5V|
|Working Current||mA||120 mA|
|Working Temperature Range||˚C||-30˚C~+85˚C|
|Video Output||AHD Video|
|Host||Supply Voltage||V||24V (12V~24V)|
|Working Temperature Range||˚C||-30˚C~+80˚C|
Rear camera: Universal rear camera should be installed at the back of the vehicle, where the height apart from the ground is at least 1.5m. The image of vehicle body has to be seen on the display. Specific camera has to be customized.
Front camera: Universal front camera should be installed at the front of the vehicle, where the height apart from the ground is at least 1.5m, adjusting the angle so that the vehicle body can be seen on the display. Specific camera has to be customized. Because of the high temperature inside the car engine, please note that the line should be put far away from the motor and the insulating material should be used for video cable and power cable. And please make the connectors waterproof as well.
Left camera: Universal left camera should be installed at the top of the left side of the vehicle, which is usually set in the middle. Please adjust the view angle before the camera is fixed on the vehicle.
Right camera: installation method is the same as that of the left camera.