Payment & Shipping Terms:
|Effective Pixels:||1280x960||Horizontal Resolution:||1000TVL|
|Image Sensor:||Sony225||Power Supply:||DC24V|
|TV System:||PAL/NTSC||Specifications::||Hd Reverse Camera|night-vision Reverse Camera|ccd Reverse Camera|waterproof Reverse Camera|
Thank you for purchasing and using our product 360˚Bird view parking system , the three-dimensional bird view driving auxiliary system. This system can collect the video image all around the vehicle simultaneously by four wide angle field cameras installed in the front/back/left/right part of the vehicle. After the image is processed, split and jointed by the image software, a 360 degree’s panoramic plan view is formed and is timely transmitted to the display equipment on the center console. With the help of the three-dimensional bird view driving auxiliary system, the drivers are able to intuitively catch sight of the location as well as the obstacles around just sitting in the vehicle and leisurely operate the parking or the bypass the complex road conditions, which effectively decreases the occurrence of scratch, crash, down throw and other traffic accidents.
* 360˚ panoramic view , eliminating blind spot
* Four-channel DVR in real time with loop recording
* High definition image (1080P)
* Advanced seamless splicing technology
* Make a clear vision around the vehicle
* Four 180°fish-eye cameras
* HD night vision
|Pixel Pitch||um||1280(H) x 960(V)|
|SNR||dB||24.0 dB (minimum)|
|The Lowest Illuminance||LUX||0.0001 LUX F1.2|
|Working Voltage||V||DC 5V|
|Working Current||mA||120 mA|
|Working Temperature Range||˚C||-30˚C~+85˚C|
|Video Output||AHD Video|
|Host||Supply Voltage||V||24V (12V~24V)|
|Working Temperature Range||˚C||-30˚C~+80˚C|
This product can be used for the vehicles with 24v, such as the school buses, buses ,trucks, industry heavy vehicles, construction vehicle, motorhome.
Rear camera: Universal rear camera should be installed at the back of the vehicle, where the height apart from the ground is at least 1.5m. The image of vehicle body has to be seen on the display. Specific camera has to be customized.
Front camera: Universal front camera should be installed at the front of the vehicle, where the height apart from the ground is at least 1.5m, adjusting the angle so that the vehicle body can be seen on the display. Specific camera has to be customized. Because of the high temperature inside the car engine, please note that the line should be put far away from the motor and the insulating material should be used for video cable and power cable. And please make the connectors waterproof as well.
Left camera: Universal left camera should be installed at the top of the left side of the vehicle, which is usually set in the middle. Please adjust the view angle before the camera is fixed on the vehicle.
Right camera: installation method is the same as that of the left camera.
Calibration for Around View
1. Calibrate the camera angle
* Vehicle body should be seen at the bottom of the image
(1) Front and rear cameras
* Front and back bumpers should be seen at 1/3 of image. The angle of the cameras should be at the range of 45˚~75˚ from the ground. The camera should be fixed once it it adjusted to the right angle.